Omron Programmable Terminals NT31 NT31C Manual de usuario descargar pdf (Pagina 195)

6-9SectionSystem Settings

185

6-9-12 Setting the Time-out Interval

The NT31/NT31C goes into the time-out error status if no response is received

from the host within a fixed time. The Time-out Interval setting specifies the time

lapse at which time-out is judged to have occurred.

The setting range is 1 to 10 seconds. The default (factory) setting is 1 second.

Reference: Whether or not an error screen is displayed when a time-out error occurs is deter-

mined by the setting for the Comm. Auto-return memory switch.

Set the time-out interval by following the menu operation from the System Menu

shown below.

Select Maintenance Mode.

Select Memory Switch.

Press [↓] (next screen) or [↑] (previous

screen) to display the third memory switch

setting screen.

Press Time-out Interval to display the re-

quired time lapse.

The setting option changes each time the

touch switch is pressed, according to the fol-

lowing sequence.

01 02 03 .... 09 10 01 ....

Ver 3.10

To set other memory switches, select the relevant screen using the [ ] (next

screen) or [

] (previous screen) touch switch, then make the setting.

• To confirm the settings and quit the memory switch setting screen, press the

Quit touch switch. The settings made last will be set and the NT31/NT31C will

return to the MAINTENANCE MODE MENU screen.

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 295 296

Sin comentarios

Omron Programmable Terminals NT31 NT31C Manual de usuario Pagina 195