Omron SYSMAC CJ1W-EIP21 Manual de usuario descargar pdf (Pagina 171)

145

Setting Tag Data Links Section 6-2

The following table describes the various settings in the dialog box.

2. When the settings are completed, click the OK Button.

Setting Function

Target Device Selects the target device.

Connection

Name

Any name can be given to the connection (up to 32 charac-

ters).

If this field is left blank, a default name will be assigned.

This Connection Name can be used for comments.

Connection I/O

Typ e

When making tag data links in a CS1W-EIP21, CJ1W-EIP21,

CJ2B-EIP21, or CJ2M-EIP21, select Input Only (Tag type).

When making tag data links in other devices, select the con-

nection I/O type specified in that device’s EDS file.

Use the Input Only (ID type) setting when another company’s

node is the originator and does not support connection set-

tings with the Tag type setting.

In/Out The connections I/O is automatically displayed based on the

selected connection.

• Input Only: Just In is displayed.

Target Variable Selects and allocates the target node’s tag set.

• In: Selects the target’s output (produce) tag set.

• Out: Selects the target’s input (consume) tag set.

Originator Vari-

able

Selects and allocates the originator node’s tag set.

• In: Selects the originator’s output (produce) tag set.

• Out: Selects the originator’s input (consume) tag set.

Connection

Typ e

Selects whether the data is sent in a multicast or unicast. The

default setting is multicast.

• Multicast connection:

Select when the same data is shared by multiple nodes. This

setting is usually selected.

• Point-to-Point connection:

Select when the same data is not being shared by multiple

nodes. In a unicast transmission, other nodes are not bur-

dened with an unnecessary load.

Note Refer to 6-1-2 Overview of Operation for details on

using multicast and unicast transmissions, and counting

the number of connections.

RPI Sets the packet interval (RPI) of each connection between the

originator and target. The interval can be set between 1 and

10,000 ms for the CJ2M and 0.5 and 10,000 ms for other CPU

Units in 0.5-ms units. The default setting is 50 ms (data

refreshed once every 50 ms).

Timeout Value Sets the time until a connection timeout is detected. The time

out value is set as a multiple of the packet interval (RPI) and

can be set to a 4, 8, 16, 32, 64, 128, 256, or 512 multiple. The

default setting is 4× the packet interval (RPI).

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 463 464

Comentarios a estos manuales

Lynwood 14 Mar 2024 | 16:50:43

How To Create An Awesome Instagram Video About Pornstars On Adultwork British Porn Stars Xxx (Https://Qooh.Me)

Omron SYSMAC CJ1W-EIP21 Manual de usuario Pagina 171

Comentarios a estos manuales